The 20-ton Wheeled Digger (model WD200) is a high-mobility hydraulic excavator engineered for urban construction, municipal utilities, and quarry load-and-carry operations. With an operating weight of 20,500 kg and a bucket capacity of 1.2 m³, this wheeled excavator delivers the digging force of a tracked machine plus the road-speed advantage of a rubber-tire chassis. Max travel speed: 35 km/h, max digging depth: 5,100 mm, and arm breakout force: 11,200 kgf. Powered by a certified Cummins or Isuzu diesel engine (128 kW) with EPA Tier 3 / EU Stage IIIA emissions compliance.
Compared to traditional crawler excavators of the same weight class, the WD200 offers 30% lower transport costs (self-drives between job sites without low-bed trailers) and 25% faster cycle times in road maintenance, trenching, and demolition applications. Key ROI advantages: Fuel consumption optimized to 14-18 L/hour (vs. industry average 22 L/hour), reinforced front linkage with 40% longer bushing life, and full access to genuine spare parts from our regional hubs (Singapore, Rotterdam, Houston) within 72 hours. Every unit includes a 1-year global warranty covering powertrain and hydraulic system failures, plus a complimentary wearing parts kit (teeth, filters, seals). Export-ready: RORO breakbulk or 40ft HC container configurations available.
The WD200 is built around a Cummins QSB6.7 or Isuzu 6BG1 turbocharged diesel engine (customer preference), delivering 128 kW at 2,000 rpm with a high-torque reserve for tough digging. The load-sensing hydraulic system uses Kawasaki or Rexroth main pumps (180 L/min flow) and pilot controls for precise simultaneous operations. The heavy-duty undercarriage features a rigid box-section chassis, planetary axle drives with integrated wet disc brakes, and 8.25-20 heavy-duty pneumatic tires (foam-filled optional). The cab meets ROPS/FOPS standards, includes adjustable suspension seat, auto-climate control, and a 7-inch LCD monitor displaying fuel burn, maintenance intervals, and real-time hydraulic pressures. Boom and arm: high-tensile steel with reinforced pivot points, grease-bathed bushings, and a standard 2.5m stick (3.0m optional).
Below is the primary data for the WD200 Wheeled Digger. All values are tested under ISO 9249 / SAE J1349 standards.
[TABLE_1]With its 1.2m³ heavy-duty bucket and precise boom control, the WD200 handles bulk earthmoving, slope trimming, and foundation backfilling. The wheeled chassis allows rapid repositioning across large residential or industrial developments without damaging finished surfaces.
Equipped with a reinforced bucket and optional grapple or magnet, the wheeled digger excels in stockpile management, rubble sorting, and loading dump trucks. The 35km/h road speed reduces non-productive travel time between extraction zones.
Trenching for water/gas lines, manhole installation, and pavement breaking are ideal applications. The rubber tires minimize road surface damage, and the optional hydraulic quick-coupler enables fast attachment changes (breaker, auger, compactor).
A: Standard FOB lead time is 20-25 working days after deposit confirmation. We offer both container loading (1 x 40ft HC per unit) and RORO breakbulk shipping. Typical ocean transit: 30-35 days to Lagos or Santos. All export documents (original bill of lading, commercial invoice, packing list, CE certificate) are provided within 3 days of sailing.
A: The warranty covers all structural, powertrain, and hydraulic component failures due to material or workmanship defects. Standard wearing parts (teeth, cutting edges, seals, filters, brake pads) are excluded but we include a free starter wearing parts kit with each machine. Extended warranty up to 3 years is available at 6% of machine value.
A: The standard configuration uses a Cummins QSB6.7 (EPA Tier 3 / EU Stage IIIA). For Tier 4 Final or Stage V compliance, we offer a DPF+SCR aftertreatment variant with a 6.7L Cummins engine (adds +$8,500). Please specify your emission zone at the time of ordering.
A: We provide a complete digital training package (videos, service manuals, and diagnostic software) free of charge. For first-time buyers, we offer a remote live video setup session with our senior technician, plus we can arrange on-site training (7 days, $3,200 plus travel) for fleets of 3 or more units.
A: We maintain a dedicated spare parts warehouse in Singapore (APAC), Dubai (MENA), and Hamburg (Europe). Routine parts (filters, belts, hoses, teeth, pins) ship within 24 hours. Major components (axles, pumps, engines) are available within 5-7 working days. We also offer a quarterly consignment stock program for fleet owners.
The 20-ton Wheeled Digger (model WD200) is a high-mobility hydraulic excavator engineered for urban construction, municipal utilities, and quarry load-and-carry operations. With an operating weight of 20,500 kg and a bucket capacity of 1.2 m³, this wheeled excavator delivers the digging force of a tracked machine plus the road-speed advantage of a rubber-tire chassis. Max travel speed: 35 km/h, max digging depth: 5,100 mm, and arm breakout force: 11,200 kgf. Powered by a certified Cummins or Isuzu diesel engine (128 kW) with EPA Tier 3 / EU Stage IIIA emissions compliance.
Compared to traditional crawler excavators of the same weight class, the WD200 offers 30% lower transport costs (self-drives between job sites without low-bed trailers) and 25% faster cycle times in road maintenance, trenching, and demolition applications. Key ROI advantages: Fuel consumption optimized to 14-18 L/hour (vs. industry average 22 L/hour), reinforced front linkage with 40% longer bushing life, and full access to genuine spare parts from our regional hubs (Singapore, Rotterdam, Houston) within 72 hours. Every unit includes a 1-year global warranty covering powertrain and hydraulic system failures, plus a complimentary wearing parts kit (teeth, filters, seals). Export-ready: RORO breakbulk or 40ft HC container configurations available.
The WD200 is built around a Cummins QSB6.7 or Isuzu 6BG1 turbocharged diesel engine (customer preference), delivering 128 kW at 2,000 rpm with a high-torque reserve for tough digging. The load-sensing hydraulic system uses Kawasaki or Rexroth main pumps (180 L/min flow) and pilot controls for precise simultaneous operations. The heavy-duty undercarriage features a rigid box-section chassis, planetary axle drives with integrated wet disc brakes, and 8.25-20 heavy-duty pneumatic tires (foam-filled optional). The cab meets ROPS/FOPS standards, includes adjustable suspension seat, auto-climate control, and a 7-inch LCD monitor displaying fuel burn, maintenance intervals, and real-time hydraulic pressures. Boom and arm: high-tensile steel with reinforced pivot points, grease-bathed bushings, and a standard 2.5m stick (3.0m optional).
Below is the primary data for the WD200 Wheeled Digger. All values are tested under ISO 9249 / SAE J1349 standards.
[TABLE_1]With its 1.2m³ heavy-duty bucket and precise boom control, the WD200 handles bulk earthmoving, slope trimming, and foundation backfilling. The wheeled chassis allows rapid repositioning across large residential or industrial developments without damaging finished surfaces.
Equipped with a reinforced bucket and optional grapple or magnet, the wheeled digger excels in stockpile management, rubble sorting, and loading dump trucks. The 35km/h road speed reduces non-productive travel time between extraction zones.
Trenching for water/gas lines, manhole installation, and pavement breaking are ideal applications. The rubber tires minimize road surface damage, and the optional hydraulic quick-coupler enables fast attachment changes (breaker, auger, compactor).
A: Standard FOB lead time is 20-25 working days after deposit confirmation. We offer both container loading (1 x 40ft HC per unit) and RORO breakbulk shipping. Typical ocean transit: 30-35 days to Lagos or Santos. All export documents (original bill of lading, commercial invoice, packing list, CE certificate) are provided within 3 days of sailing.
A: The warranty covers all structural, powertrain, and hydraulic component failures due to material or workmanship defects. Standard wearing parts (teeth, cutting edges, seals, filters, brake pads) are excluded but we include a free starter wearing parts kit with each machine. Extended warranty up to 3 years is available at 6% of machine value.
A: The standard configuration uses a Cummins QSB6.7 (EPA Tier 3 / EU Stage IIIA). For Tier 4 Final or Stage V compliance, we offer a DPF+SCR aftertreatment variant with a 6.7L Cummins engine (adds +$8,500). Please specify your emission zone at the time of ordering.
A: We provide a complete digital training package (videos, service manuals, and diagnostic software) free of charge. For first-time buyers, we offer a remote live video setup session with our senior technician, plus we can arrange on-site training (7 days, $3,200 plus travel) for fleets of 3 or more units.
A: We maintain a dedicated spare parts warehouse in Singapore (APAC), Dubai (MENA), and Hamburg (Europe). Routine parts (filters, belts, hoses, teeth, pins) ship within 24 hours. Major components (axles, pumps, engines) are available within 5-7 working days. We also offer a quarterly consignment stock program for fleet owners.
