全球工程机械一站式采购平台
GLOBALMACHEX
全球工程机械一站式采购平台
GLOBALMACHEX
Fully Automatic Mining Anchor Bolt Production Line、One-to-One Anchor Bolt Straight-End Shearing Production Line、One-to-Two Anchor Bolt Straight-End & Angle-End Shearing Production Line、One-to-Two Anchor Bolt Straight-End Cutting Production Line

Fully Automatic Mining Anchor Bolt Production Line、One-to-One Anchor Bolt Straight-End Shearing Production Line、One-to-Two Anchor Bolt Straight-End & Angle-End Shearing Production Line、One-to-Two Anchor Bolt Straight-End Cutting Production Line

USD $80000.00 - $280000.00 / 套

最小起订量: 1套

参考价格:
USD $80000.00 - $280000.00
最小起订量:
1套
供货能力:
1套/周
发送询盘

产品特点与应用

This production line can be used for the automated workflow of swaging/reducing → thread rolling, featuring diversified design solutions with various functions that can be flexibly combined according to your needs. Specific Steps: Use an overhead crane to place bundled anchor bolts onto the conveyor chain of the feeding and ejecting machine. Manually control the conveyor chain to move the anchor bolts horizontally to the ejecting position. The operator sets the parameters and starts the equipment. The anchor bolt feeding and ejecting machine automatically ejects a single anchor bolt to the material waiting area of the swaging feeder. When the ejecting position has no material, the conveyor chain automatically moves forward. The swaging feeder works automatically: automatic vibration, automatic material loading, automatic turning, and automatic feeding to the designated position of the swaging machine. The swaging machine automatically performs swaging, automatically ejects the material to the designated position, automatically turns the material, and the chain conveyor transports it to the material waiting area of the thread rolling feeder. The thread rolling feeder works automatically: automatic material loading, automatic turning, and automatic feeding to the designated position of the thread rolling machine. The thread rolling machine automatically performs thread rolling, automatically ejects the material to the designated position, and automatically turns the material to the finished product rack. Manual nut assembly and bundling.

One-to-One Anchor Bolt Straight-End Shearing Production Line

This production line can process mining anchor bolts with diameters of 18mm, 20mm, and 22mm, and lengths from 1m to 3m (customizable).

1. Overall Process Flow

Overhead crane places bundled anchor bolt steel onto the storage rack → Manually roll the steel bars into the inclined waiting area on one side of the storage rack → Automatic discharging from the storage rack → Automatic feeding → Automatic fixed‑length cutting → Straight‑end shearing → Finished product rack.

2. Product Advantages

  1. This production line enables automatic shearing of anchor bolts. Various sensors precisely sense the status between processes, and a central control cabinet provides unified control.

  2. The equipment has a small footprint, and the coordination between processes is scientifically sound and rational.

  3. An inclined waiting area is provided on one side of the storage rack, capable of storing 1–20 bars. After a full bar is transported, the automatic control cycles to discharge the next bar.

  4. The shearing machine uses semicircular blades, resulting in a circular, burr‑free cut, which effectively reduces the torque required when tightening the locking nut.

  5. The straight‑end shearing process is equipped with multiple fixed‑length devices with preset positions (e.g., 1.6m, 2m, 2.4m, etc.), controlled pneumatically. During normal production, a selector switch can control them without manual mechanical adjustment.

  6. After straight‑end shearing, a turning device sends the anchor bolts to the finished product area.

  7. The overall protective cover is powder‑coated, offering an attractive appearance and an oily surface that is resistant to dirt.

  8. Equipped with a wireless remote control device, allowing independent start/stop control of each process.

3. Main Technical Parameters

Parameter Specification
Power Supply Operating voltage: 380V
Equipment Dimensions Approx. 17m (L) × 3m (W), adjustable according to site layout
Total Power Approx. 15kW (including the shearing machine)
Product Specifications Anchor bolts of 1–3m length (customizable)
Production Efficiency Approx. 3000 pieces per 8‑hour shift
Operators Required 1 person

4. Supporting Equipment

  1. Storage rack

  2. Straight‑end shearing system

  3. Angle‑end shearing system (optional, can be added upon customer request)

  4. Finished product rack

  5. Central control console


    One-to-Two Anchor Bolt Straight-End Cutting Production Line

    This production line can be used to process mining anchor bolts with diameters of 18mm, 20mm, and 22mm, and lengths from 1m to 3m (customizable).

    Overall Process Flow

    Overhead crane places bundled anchor bolt steel onto the storage rack → Manually roll the steel bars into the inclined waiting area on one side of the storage rack → Automatic discharging from the storage rack → Automatic feeding → Automatic fixed-length cutting → Straight-end shearing → Finished product rack.

    Product Advantages

    1. This production line enables automatic shearing of anchor bolts. Various sensors precisely sense the status between processes, and a central control cabinet provides unified control.

    2. The equipment has a small footprint, and the coordination between processes is scientifically sound and rational.

    3. An inclined waiting area is provided on one side of the storage rack, capable of storing 1–20 bars. After the entire bar is transported, the automatic control cycles the next discharging.

    4. The shearing machine uses semicircular blades, resulting in a circular, burr‑free cut, which effectively reduces the torque required when tightening the locking nut.

    5. The straight-end shearing process is equipped with multiple fixed-length devices with preset positions (e.g., 1.6m, 2m, 2.4m, etc.), controlled pneumatically. During normal production, a selector switch can control them without manual mechanical adjustment.

    6. After straight-end shearing, a turning device sends the anchor bolts to the finished product area.

    7. The overall protective cover is powder‑coated, offering an attractive appearance and an oily surface that is resistant to dirt.

    8. Equipped with a wireless remote control device, allowing independent start/stop control of each process.

    Main Technical Parameters

    Parameter Specification
    Power Supply Operating voltage: 380V
    Equipment Dimensions Approx. 17m (L) × 6m (W), adjustable according to site layout
    Total Power Approx. 20kW (including the shearing machine)
    Product Specifications Anchor bolts of 1–3m length (customizable)
    Production Efficiency Approx. 3000 pieces per 8‑hour shift
    Operators Required 1 person

    Supporting Equipment

    1. Storage rack

    2. Straight-end shearing system

    3. Angle-end shearing system (optional, can be added upon customer request)

    4. Finished product rack

    5. Central control console

      One-to-Two Anchor Bolt Straight-End & Angle-End Shearing Production Line

      This production line can process mining anchor bolts with diameters of 18mm, 20mm, and 22mm, and lengths from 1m to 3m (customizable).

      1. Overall Process Flow

      Overhead crane places bundled anchor bolt steel onto the storage rack → Manually roll the steel bars into the inclined waiting area on one side of the storage rack → Automatic discharging from the storage rack → Automatic feeding → Automatic fixed‑length cutting → Straight‑end shearing → Finished product rack.

      2. Product Advantages

      1. This production line enables automatic shearing of anchor bolts. Various sensors precisely sense the status between processes, and a central control cabinet provides unified control.

      2. The equipment has a small footprint, and the coordination between processes is scientifically sound and rational.

      3. An inclined waiting area is provided on one side of the storage rack, capable of storing 1–20 bars. After a full bar is transported, the automatic control cycles to discharge the next bar.

      4. The shearing machine uses semicircular blades, resulting in a circular, burr‑free cut, which effectively reduces the torque required when tightening the locking nut.

      5. The straight‑end shearing process is equipped with multiple fixed‑length devices with preset positions (e.g., 1.6m, 2m, 2.4m, etc.), controlled pneumatically. During normal production, a selector switch can control them without manual mechanical adjustment.

      6. After straight‑end shearing, a turning device sends the anchor bolts to the finished product area.

      7. The overall protective cover is powder‑coated, offering an attractive appearance and an oily surface that is resistant to dirt.

      8. Equipped with a wireless remote control device, allowing independent start/stop control of each process.

      3. Main Technical Parameters

      Parameter Specification
      Power Supply Operating voltage: 380V
      Equipment Dimensions Approx. 17m (L) × 6m (W), adjustable according to site layout
      Total Power Approx. 20kW (including the shearing machine)
      Product Specifications Anchor bolts of 1–3m length (customizable)
      Production Efficiency Approx. 3000 pieces per 8‑hour shift
      Operators Required 1 person

      4. Supporting Equipment

      1. Storage rack

      2. Straight‑end shearing system

      3. Angle‑end shearing system (optional, can be added upon customer request)

      4. Finished product rack

      5. Central control console

       

发送询盘